Metallic Epoxy in AustinLiquid-metal floors with depth and mirror gloss

Most metallic epoxy flooring projects in Austin run $4 to $14 per square foot depending on the system, slab condition and size. We give free on-site estimates with guaranteed pricing, so call (832) 253-3211 for an exact Austin number.

Most residential metallic epoxy flooring jobs in Austin finish in two to three days including prep and cure; larger commercial work is phased so you keep running. Call (832) 253-3211 to scope your Austin timeline.

Not when it is installed right. Wear shows first at turning points and entry doors, and the topcoat is the layer that wears, not the whole system. Ask about maintenance options at (832) 253-3211.

Yes. We mechanically diamond-grind every Austin floor to clean, profiled concrete before any product goes down. That prep is why metallic epoxy flooring lasts a decade instead of peeling. Book your Austin assessment at (832) 253-3211.

A smooth topcoat can be, which is why we add texture where water, oil or foot traffic call for it. The grit is chosen to balance grip against how hard the floor is to clean. Ask about it on your free Austin quote at (832) 253-3211.

A neutral cleaner and a soft pad or mop. Avoid harsh solvents, abrasive powders and anything with wax or oil soap. Sweep grit off before you mop, because grit is what dulls a topcoat. We leave every Austin customer simple care notes. Call (832) 253-3211.

Even, open and dull, with no shiny patches, old paint in the low spots or oily stains. A water droplet on it should soak in slightly rather than bead. We pause at this stage so you can look. Call (832) 253-3211 to see what to check.

Yes. We schedule nights and weekends and use fast-cure systems so your Austin home or business keeps moving. Call (832) 253-3211 to plan it.

Sometimes, but only after the old floor is judged sound. We look for peeling paint, old sealer and soft spots, grind or strip whatever is loose, and patch the slab before anything new goes down. A coating over a failing one fails with it. Book an assessment at (832) 253-3211.

It can if nobody checks. Vapor pushing up under a coating is the usual reason for blisters and lifted patches. We measure it first, and on a damp Austin slab we seal it with a mitigation primer before the main system. Start with a call to (832) 253-3211.

Yes. Crack, joint and spall repair is part of our Austin prep, so the finished floor is smooth and sound. Book your repair and quote at (832) 253-3211.

Dozens. Custom colors, flake blends, metallic effects, logos and solid colors are all on the table for your Austin floor. We bring samples to your free estimate. Call (832) 253-3211.

It does, and we install in showroom, shop or garage spaces around Austin. The system is chosen for how the floor will be used, then scheduled so your doors stay open as much as possible. Call (832) 253-3211 to plan your project.

Tile has grout that stains, paint wears through, and plain sealer wears off. A bonded epoxy system is seamless and can be rebuilt on top when it finally wears. We will go through the real trade-offs for your Austin space at no cost. Call (832) 253-3211 for a free consult.

Hot tires are the classic failure on a thin or poorly prepped floor. Ground concrete and the right primer give the bond that resists tire pickup, and the topcoat is chosen for foot traffic, rolling carts and sun through the front glass. Free quote at (832) 253-3211.

Most Austin floors are walkable in about 24 hours and ready for vehicles within a few days, sooner with fast-cure systems. We give you the exact schedule. Call (832) 253-3211.

Yes. Garages and homes to warehouses and storefronts across Austin, one crew handles the whole job. Call (832) 253-3211 for a free quote.

Wipe them up and the floor is fine for the common ones: oil, coolant and soap. If you handle aggressive chemicals, tell us the names and we will spec a tougher topcoat. Ask us at (832) 253-3211.

Si. Cotizamos y trabajamos en ingles o espanol en Austin. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.

Always. We come to your Austin home or business, measure, talk options and give guaranteed pricing at no cost. Call (832) 253-3211 and we typically respond within 24 hours.

Yes. We blend custom metallic colors and effects, from subtle marble to bold lava patterns, and bring samples to your estimate. Call (832) 253-3211 for a free Austin quote.

Marbling hides stains and uneven color well, but not cracks or pits, so those are repaired and smoothed first. Call (832) 253-3211 for a free Austin quote.

Yes. Metallic flows uniquely as it cures, so your floor is one of a kind. We can steer the look lighter, darker or more dramatic. Call (832) 253-3211 for a free Austin quote.

It suits spaces where customers see the floor: showrooms, retail, offices and entries. Choose the topcoat for the traffic. Call (832) 253-3211 for a free Austin quote.

Yes, with the right topcoat. Sun-facing areas get a UV-stable finish so the metallic color does not shift over time. Call (832) 253-3211 for a free Austin quote.

Yes, a written 1-year warranty on workmanship. It does not cover chipping, cracking or hydrostatic pressure. Call (832) 253-3211 and we will walk you through exactly what is covered.