#1 in Texason FloorRank ↗
Austin, Texas · Epoxy Removal
Epoxy Removal in AustinFailed coating ground off. Clean concrete, or a brand-new floor, in.
Austin sits where Hill Country limestone meets the Blackland Prairie, and its slabs and its jobs are different from Houston's. We remove failed epoxy to clean concrete and leave a surface ready for the next floor.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why Austin epoxy floors fail
Austin straddles the Balcones Escarpment, with limestone-based Hill Country ground to the west and clay-rich Blackland Prairie soils to the east, so slabs here do not all behave alike. Add heat, fast-built commercial space along Interstate 35, MoPac and State Highway 71, and tenant changes that never stop, and you get epoxy that was applied to a surface nobody tested. We grind it off, repair the slab and leave it profiled.
Epoxy demo in Austin, done by the people who install epoxy
In Austin we take epoxy removal for tenant-improvement contractors and property managers, for tech and lab space turning over, and for homeowners in Tarrytown, Mueller and West Lake Hills with a garage coating to remove. Austin is one of the three metros we serve, and the request is the same wherever we work: take the epoxy off, protect the slab and finish on schedule.
Remove and replace: old epoxy out, new floor in
After removal in Austin the next floor depends on the room: polished concrete or a metallic system for an office or studio, flake for a garage, an industrial grade or ESD system for a lab or warehouse. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across Austin
We handle epoxy removal in Austin and the communities around it. These Austin neighborhoods have their own pages:
After epoxy removal: every New Era system ready to go down in Austin
With the Austin slab ground clean, these are the floors the same crew can install on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why Austin trusts the epoxy installers to remove epoxy
Austin's ground changes from one side of town to the other, and so does the slab.
- We read the slab first, because Austin concrete over limestone and concrete over clay can behave very differently.
- Work is scheduled and documented, so a tenant-improvement contractor can plan the next trade around us.
- We take off the coating, not the concrete: cracks, joints and spalls are repaired as part of the work.
- Honest assessment first. If your Austin floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in Austin FAQ
How much does epoxy removal cost in Austin?
It depends on the square footage, how thick the coating is and how well it is still bonded. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free Austin assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your Austin assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free Austin quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
Our Austin tenant space has an epoxy floor we do not want. Can it come off?
Yes. Epoxy comes off by diamond grinding, and a lease turnover or a redesign is a common reason. We assess the coating, protect the slab and leave it profiled and ready for the next trade. Call (832) 253-3211.
What is the slab like after epoxy removal in Austin?
Clean, mechanically profiled concrete with cracks, joints and spalls repaired, ready for a new floor or left bare. Call (832) 253-3211 to plan your Austin project.
Do you work with Austin contractors and property managers?
Yes. Contractors, tenants and property managers across Austin use us to clear failed coatings ahead of new flooring, on schedule and documented. Larger spaces are phased. Call (832) 253-3211.
How long does removal take for an Austin space?
Most single garages are done in about a day. Commercial and lab floors are phased so a building can keep operating, and we confirm the timeline when we measure. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes. In Austin that means one crew from demo to install: the same team grinds off the failed epoxy and installs the new system, one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished Austin homes and businesses. Details on your free assessment, (832) 253-3211.
Can you remove more than epoxy from Austin floors?
Yes. Floor paint, sealers, urethane and polyaspartic come off the same mechanical way. See our coating removal service or call (832) 253-3211 for a free Austin quote.
Will removal damage my Austin slab?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. Call (832) 253-3211.
My Austin epoxy failed once. What do you check before the next one?
Moisture, slab condition and profile. We moisture-test, install mitigation primer when needed and grind to a proper profile before anything goes down, then walk the finished floor with you. Call (832) 253-3211.
Hablan Espanol en Austin?
Si. Cotizamos y trabajamos en ingles o espanol en Austin. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in Austin?
Yes. We come to your Austin home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in Austin
Every system we install and remove in Austin, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in Austin?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in Austin and we reply fast.
