New Era Epoxy · Fabricators and machine shops
Coating for FabricatorsParts and frames finished before they ship
If you build steel, the finish is the last thing your customer sees. We prepare, prime and topcoat parts so they leave looking right.
- Surface prep
- Primer
- Topcoat
- Full cure
Tell us what you are coating and send a photo. A free quote starts there.
Work we take from shops
From a single frame to repeat parts, finished to a color and spec you give us.
Frames and fixtures
Weldments, stands and machine bases.
Brackets and plates
Parts that need a protected, even finish.
Gates and railings
Ornamental and structural runs.
Equipment and skids
Skid frames, enclosures and housings.
How a steel coating job goes
The same four steps on every piece, whatever the size.
Look at the steel
What it is, where it lives and how it fails today: rust, peeling paint, chemical splash, or bare metal that has not been protected yet.
Prepare the surface
Coatings hold or fail on the prep. Rust, mill scale, oil and old paint come off down to clean, profiled metal.
Prime
A primer goes on bare steel to bond to it and slow rust from starting underneath the finish.
Topcoat and cure
A hard, washable topcoat in the color you choose, left to cure fully before the steel goes back to work.
Have steel that needs coating?
Send a photo and a rough size. We'll tell you what it needs.
Why send your coating out
Coating takes space, prep time and attention you'd rather spend on fabrication. Handing it off keeps your bays making steel.
- Frees your floorYour bays stay on cutting and welding.
- Prepared the same way each timeConsistent prep is what makes the finish consistent.
- Finished to your colorGive us the color and we'll confirm what can be matched.
- Looks right at deliveryYour customer sees a finished piece, not a primed one.
Steel coating by city
Choose your city for local details.
Steel coating in Houston
Towns we serve and what to send.
See more
Steel coating in Austin
Towns we serve and what to send.
See more
Steel coating in San Antonio
Towns we serve and what to send.
See moreMore steel we coat:
Questions about steel coating
Can you coat parts to a customer's color or spec?
Send the color and any spec. We'll confirm what can be matched when we quote.
Do you handle repeat work?
Tell us the quantity and frequency. A repeat job is quoted differently from a one-off.
What prep do fabricated parts need?
Mill scale, weld spatter and oil come off first. The surface is cleaned and primed before the topcoat.
What coating is common for fabricated steel?
An epoxy primer and a urethane topcoat is a common system, chosen for adhesion, protection and finish.
Can you coat large assemblies?
Send dimensions and photos. Size and access decide what is practical.
How do I get a quote?
Call (832) 253-3211 or use the form on this page with photos or drawings and quantities.
Ready to get your steel coated?
Send what you have. Photos and a rough size are enough for a free quote.
