New Era Epoxy · Houston, Texas
Steel Coating in HoustonFor steel that sits in Gulf Coast air
Houston's humid Gulf Coast climate is hard on bare steel. New Era coats trailers, equipment, building steel and fabricated parts in Houston and the towns around it.
- Surface prep
- Primer
- Topcoat
- Full cure
Tell us what you are coating and send a photo. A free quote starts there.
Steel we coat around Houston
Four kinds of work, one process. Choose the one that looks like yours.
Trailers and equipment
For haulers, contractors and fleets along the Katy, Cypress and Baytown corridors.
See more
Ranch and farm steel
Pipe gates, pens and feeders on the rural edges of Montgomery, Waller and Brazoria counties.
See more
Steel buildings
Frames, columns and doors for warehouses and metal shops across Greater Houston.
See more
Fabricators and machine shops
Parts and assemblies from shops in Pasadena, Spring, Conroe and across the metro.
See moreHow a steel coating job goes
The same four steps on every piece, whatever the size.
Look at the steel
What it is, where it lives and how it fails today: rust, peeling paint, chemical splash, or bare metal that has not been protected yet.
Prepare the surface
Coatings hold or fail on the prep. Rust, mill scale, oil and old paint come off down to clean, profiled metal.
Prime
A primer goes on bare steel to bond to it and slow rust from starting underneath the finish.
Topcoat and cure
A hard, washable topcoat in the color you choose, left to cure fully before the steel goes back to work.
Have steel that needs coating?
Send a photo and a rough size. We'll tell you what it needs.
Why Houston steel needs more than paint
Warm, wet air and long rainy stretches keep steel damp. Paint over rust or thin primer gives way in the first season, and the repaint is the real cost.
- Moisture is the enemyA sealed epoxy primer under a urethane topcoat keeps damp air off the metal.
- Prep before anything elseRust and mill scale come off first, because the coating can only be as sound as what it sits on.
- Easier to wash downA smooth finish releases mud, grease and dust instead of holding them.
- Close to where you workWe serve Houston and the surrounding towns listed below.
Houston-area towns we serve
Each links to our floor page for that town. See all Houston floor work.
Steel coating by kind of work
Find the page closest to your steel.
Questions about steel coating
Why does steel rust faster in Houston?
Houston's humid Gulf Coast air keeps steel damp for long stretches, and moisture plus bare metal is all rust needs. A sealed primer and topcoat keep that moisture off the surface.
What coating works best on outdoor steel in Houston?
A common approach is an epoxy primer on clean steel with a UV-stable urethane topcoat. The primer bonds and blocks moisture, and the urethane holds color and gloss in strong sun.
Can you recoat a trailer or equipment that is already rusting?
Usually yes, after the rust and failing paint are removed down to clean metal. A coating applied over rust will lift with it, so the prep comes first.
Do you serve towns outside Houston?
Yes. This page lists the Houston-area towns we serve, including Katy, Sugar Land, Conroe, The Woodlands, Spring, Pearland and Baytown. Ask if yours isn't listed.
Can you match a color?
Tell us the color or send a photo of the piece. We'll confirm what can be matched when we quote.
How do I get a steel coating quote in Houston?
Call (832) 253-3211 or use the form on this page with photos and the rough size. A free quote starts from that.
Ready to get your steel coated?
Send what you have. Photos and a rough size are enough for a free quote.
