#1 in Texason FloorRank ↗
Cypress, Texas · Epoxy Removal
Epoxy Removal in CypressFailed coating ground off. Clean concrete, or a brand-new floor, in.
Cypress has more detached workshops and big garages than most of the metro, and the epoxy in them takes a beating. We grind failed shop coatings to clean concrete and can put a tougher floor back down.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why Cypress epoxy floors fail
Cypress lots run larger than in much of Harris County, and with that comes the detached shop, the oversized garage and the workshop where somebody actually works. Welding spatter, dropped tools, trailer tires and months of oil take a thin garage epoxy apart quickly, and what is left is a patchwork of lifted film and bare concrete. We grind it off down to sound concrete, repair the damage underneath, and leave a profiled slab.
Epoxy demo in Cypress, done by the people who install epoxy
In Cypress we take epoxy removal for owners in Bridgeland and Towne Lake with a home shop, for contractors along US 290 and the Grand Parkway, and for small businesses in the commercial parks. The job is the same: remove the worn coating without chewing up the slab, so the replacement can be built heavier.
Remove and replace: old epoxy out, new floor in
Cypress shop floors tend to need more than a garage kit, so the replacement is often an industrial grade system, or a flake system for the part of the building that sees show-quality traffic. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across Cypress
We handle epoxy removal across Cypress, from Bridgeland out to the Grand Parkway. These Cypress communities have their own pages:
After epoxy removal: every New Era system ready to go down in Cypress
Once the Cypress shop floor is ground clean, these are the systems the same crew can install on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why Cypress trusts the epoxy installers to remove epoxy
A shop floor deserves more than a garage kit.
- We know the difference between a decorative garage coating and a shop floor that has to take tools, spatter and trailers.
- Heavy equipment and diamond tooling sized for thick or heavily worn coatings, not just thin garage films.
- We take off the coating, not the concrete: cracks, joints and spalls get repaired during prep.
- Honest assessment first. If your Cypress floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in Cypress FAQ
How much does epoxy removal cost in Cypress?
It depends on the square footage, the thickness of the coating and how much oil or wear is in it. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free Cypress assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your Cypress assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free Cypress quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
Can I recoat my Cypress workshop floor without removing the old epoxy?
Only if it is still fully bonded and clean. Oil-soaked or lifting epoxy will not hold a new coat, so it has to come off first. We test the floor and tell you straight whether it can be recoated. Call (832) 253-3211.
What is left on a Cypress shop slab after removal?
Clean, mechanically profiled concrete. If oil has gone deep we tell you before we coat, and cracks, joints and spalls are repaired so the next system has something solid to bond to. Call (832) 253-3211.
Do you remove epoxy from Cypress commercial and warehouse floors?
Yes. Contractors, owners and property managers across Cypress use us to clear failed coatings ahead of new flooring, on schedule and documented. Larger floors are phased. Call (832) 253-3211.
How long does a Cypress shop or large garage take?
Most single garages finish in about a day. A bigger shop or commercial floor gets phased so you can keep working, and we confirm the schedule when we measure. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes. For Cypress shops that is usually the plan: the same crew grinds off the worn epoxy and installs a heavier system, one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished Cypress homes and businesses. Details on your free assessment, (832) 253-3211.
Do you also remove shop paint and sealers in Cypress?
Yes. Floor paint, sealers, urethane and polyaspartic come off the same mechanical way. See our coating removal service or call (832) 253-3211 for a free Cypress quote.
Will grinding damage my Cypress slab?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. Call (832) 253-3211.
My Cypress shop epoxy failed fast. Why, and how do we prevent it?
Often the wrong product for the traffic, or prep that was skipped. We moisture-test, install mitigation primer when needed, grind to a proper profile, and recommend a system sized for what the floor actually does. Call (832) 253-3211.
Hablan Espanol en Cypress?
Si. Cotizamos y trabajamos en ingles o espanol en Cypress. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in Cypress?
Yes. We come to your Cypress home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in Cypress
Every system we install and remove in Cypress, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in Cypress?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in Cypress and we reply fast.
