#1 in Texason FloorRank ↗
Houston, Texas · Epoxy Removal
Epoxy Removal in HoustonFailed coating ground off. Clean concrete, or a brand-new floor, in.
Failed epoxy comes off Houston floors the same way it went on: with the slab read first. We grind the coating to clean, profiled concrete, test it for moisture, and either install the replacement or hand you the slab ready for the next trade.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why Houston epoxy floors fail
Houston's humid subtropical climate puts moisture to work on every slab. Water vapor travels up through the concrete, gets trapped under a tight epoxy film, and pushes it into blisters or lifts it in sheets. That is a frequent cause of coating failure on Houston slabs, which is why removal in Houston starts with reading the slab, not just the coating. We diamond-grind the failed epoxy off to clean concrete, repair the cracks, joints and spalls we uncover, and leave a profiled surface ready for a moisture test and whatever goes down next.
Epoxy demo in Houston, done by the people who install epoxy
We take epoxy removal across Houston: a shop inside the Loop, a garage in Bellaire or Memorial, a warehouse off the Beltway, a retail space in Montrose. The coating is different each time, but the job is the same. Take the epoxy off, leave the concrete intact, and hand the next trade a surface they do not have to fix first.
Remove and replace: old epoxy out, new floor in
In Houston the replacement has to answer for the same humidity that took the first floor down, so the new system is chosen after the slab is tested. That might be flake or metallic for a garage, an industrial system for a shop or warehouse, or polished concrete where an owner would rather have no coating left to fail. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across Houston
We run epoxy removal across Houston, inside the Loop and out toward Beltway 8. These Houston neighborhoods have their own pages:
After epoxy removal: every New Era system ready to go down in Houston
Once the Houston slab is ground clean and tested, these are the systems the same crew can put down on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why Houston trusts the epoxy installers to remove epoxy
Rental grinders do not read moisture. We do, and it changes what goes back down.
- We install epoxy for a living, so we can tell a moisture failure from a bad bond before the first pass of the grinder.
- Grinders and diamond tooling sized for the job, from a bungalow garage near the Heights to a full warehouse floor.
- We take off the coating, not the concrete: cracks, joints and spalls get repaired and the slab comes out ready to test.
- Honest assessment first. If your Houston floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in Houston FAQ
How much does epoxy removal cost in Houston?
Price follows the square footage, the thickness of the old coating and how much of it is still bonded, and in Houston a moisture reading on the slab can change the scope too. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free Houston assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your Houston assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free Houston quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
Why did my Houston epoxy floor bubble?
Usually moisture. Vapor rising through the slab gets trapped under the epoxy and pushes it up in blisters, and Houston's humid air keeps that pressure on all year. Coating over the bubbles only hides them for a season. We grind the failed layer off, test the slab and tell you what it needs before anything new goes down. Call (832) 253-3211.
Will you test the slab before a new floor goes down in Houston?
Yes. After removal we check the concrete for moisture, and if the reading calls for it we install a mitigation primer first. That step is the difference between a second floor that holds and one that blisters like the first. Call (832) 253-3211 to plan your Houston project.
Can you work around a running business in Houston?
Yes. Shops, warehouses and offices cannot always shut down, so larger floors are phased in sections and the work area is contained, with dust collection running on the grinders. Call (832) 253-3211 to coordinate your Houston job.
How long will a Houston garage floor take?
Most single garages are done in about a day. A larger Houston floor gets scheduled in phases, and we confirm the timeline when we measure it. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes, and in Houston that is the usual request. The crew that grinds off the failed epoxy installs the new system, so there is no gap between trades: one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished Houston homes and businesses. Details on your free assessment, (832) 253-3211.
Do you remove other coatings in Houston, or only epoxy?
Both. Paint, sealers, urethane and polyaspartic come off the same mechanical way. If yours is not epoxy, see our coating removal service or call (832) 253-3211 for a free Houston quote.
Will grinding crack or gouge my Houston slab?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. Houston slabs move with the clay soil under them, so a clean repair now means the new floor is not sitting on a weak spot. Call (832) 253-3211.
My Houston epoxy failed once. What changes the second time?
The prep. Most failures trace back to skipped moisture testing or a thin grind, not to the epoxy itself. We moisture-test, install mitigation primer when needed, grind to a proper profile, and walk the finished floor with you. Call (832) 253-3211.
Hablan Espanol en Houston?
Si. Cotizamos y trabajamos en ingles o espanol en Houston. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in Houston?
Yes. We come to your Houston home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in Houston
Every system we install and remove in Houston, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in Houston?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in Houston and we reply fast.
