#1 in Texason FloorRank ↗
San Antonio, Texas · Epoxy Removal
Epoxy Removal in San AntonioFailed coating ground off. Clean concrete, or a brand-new floor, in.
San Antonio has older buildings, newer subdivisions and a lot of floors with more than one layer on them. We take failed epoxy down to clean concrete and keep the work contained.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why San Antonio epoxy floors fail
San Antonio runs from the older neighborhoods around Alamo Heights and Terrell Hills to newer subdivisions toward Stone Oak and The Dominion, with Interstate 10, I-35 and Loop 1604 tying them together. The older the building, the likelier its floor carries a coating over a coating over something else. We grind the failed epoxy off, find what is underneath and repair the cracks and spalls before the slab is called ready.
Epoxy demo in San Antonio, done by the people who install epoxy
In San Antonio we take epoxy removal for owners of older commercial buildings, for contractors working along Loop 410 and Loop 1604, and for homeowners in Olmos Park or Stone Oak with a worn garage floor. San Antonio is one of the three metros we serve, and the request is the same: remove the coating, spare the concrete and leave the site clean.
Remove and replace: old epoxy out, new floor in
After removal in San Antonio the next floor depends on what was underneath: flake or metallic for a garage, polished concrete for an older commercial space that suits it, an industrial grade system for a shop. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across San Antonio
We handle epoxy removal across San Antonio and the neighborhoods around it. These San Antonio areas have their own pages:
After epoxy removal: every New Era system ready to go down in San Antonio
With the San Antonio slab ground clean, these are the floors the same crew can install on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why San Antonio trusts the epoxy installers to remove epoxy
Older floors tend to hold more layers than the owner expects.
- We expect layers on older San Antonio floors and plan the grind for whatever turns out to be under the epoxy.
- Dust collection on the grinders and a contained work area, so slurry and dust stay where we put them.
- We take off the coating, not the concrete: cracks, joints and spalls are repaired during prep.
- Honest assessment first. If your San Antonio floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in San Antonio FAQ
How much does epoxy removal cost in San Antonio?
It depends on the square footage, how many layers are on the floor and how well they are bonded. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free San Antonio assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your San Antonio assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free San Antonio quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
My San Antonio floor has epoxy over older paint. How do you handle that?
We assess the layers on site, then grind through all of them to sound concrete. Coating over a stack of old finishes is how floors fail again. We tell you what we find and what it means for the price. Call (832) 253-3211.
What do I get after epoxy removal in San Antonio?
Clean, profiled concrete with cracks, joints and spalls repaired, ready for a new system or left bare. Call (832) 253-3211 to plan your San Antonio project.
Do you work with San Antonio contractors and building owners?
Yes. Contractors, owners and property managers across San Antonio use us to clear failed coatings ahead of new flooring, on schedule and documented. Call (832) 253-3211 to coordinate your job.
How long does removal take in a San Antonio building?
Most single garages are done in about a day. A layered or larger commercial floor takes longer and is phased, and we confirm the timeline when we measure. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes. In San Antonio that keeps the prep and the new floor on one crew: the same team grinds off the failed epoxy and installs the new system, one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished San Antonio homes and businesses. Details on your free assessment, (832) 253-3211.
Can you remove paint, sealers or other coatings in San Antonio?
Yes. Floor paint, sealers, urethane and polyaspartic come off the same mechanical way. See our coating removal service or call (832) 253-3211 for a free San Antonio quote.
Will removal damage my San Antonio slab?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. Call (832) 253-3211.
My San Antonio epoxy failed once. How is the next floor different?
We moisture-test, install mitigation primer when needed and grind to a proper profile before anything goes down, then walk the finished floor with you. Call (832) 253-3211.
Hablan Espanol en San Antonio?
Si. Cotizamos y trabajamos en ingles o espanol en San Antonio. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in San Antonio?
Yes. We come to your San Antonio home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in San Antonio
Every system we install and remove in San Antonio, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in San Antonio?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in San Antonio and we reply fast.
