#1 in Texason FloorRank ↗
Pasadena, Texas · Epoxy Removal
Epoxy Removal in PasadenaFailed coating ground off. Clean concrete, or a brand-new floor, in.
Pasadena floors work next to the Ship Channel. We remove epoxy that has been chemically attacked, worn through or lifted by humid coastal air, and leave clean, repaired concrete for what comes next.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why Pasadena epoxy floors fail
Pasadena sits southeast of Houston along State Highway 225, close enough to the Houston Ship Channel and Galveston Bay that salty, humid air is part of the building environment. Many Pasadena shops, supply yards and service bays share it with chemicals, fuels and washdowns, and a coating that was not matched to them lifts, softens or stains. We grind the failed epoxy off, repair the slab and leave a profiled surface for a system that suits the room.
Epoxy demo in Pasadena, done by the people who install epoxy
In Pasadena we take epoxy removal for shop and facility owners off Spencer Highway and Beltway 8, for contractors turning over industrial space, and for homeowners in Golden Acres with a garage that has taken a beating. The slab is what matters most, and the point is to take the coating off without damaging it.
Remove and replace: old epoxy out, new floor in
In Pasadena the replacement is often an industrial grade system chosen for what the floor sees, with flake or metallic where a garage or showroom is the goal. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across Pasadena
We handle epoxy removal across Pasadena and the neighborhoods around it. These Pasadena communities have their own pages:
After epoxy removal: every New Era system ready to go down in Pasadena
Once the Pasadena slab is ground clean, these are the systems the same crew can install on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why Pasadena trusts the epoxy installers to remove epoxy
The right floor starts with an honest read of what the room does to it.
- We ask what the floor is exposed to, because chemicals and washdowns decide which new system makes sense.
- Commercial grinders and diamond tooling sized for industrial bays as well as single garages.
- We take off the coating, not the concrete: cracks, joints and spalls are repaired as part of the work.
- Honest assessment first. If your Pasadena floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in Pasadena FAQ
How much does epoxy removal cost in Pasadena?
It depends on the square footage, how thick the coating is and how well it is still bonded. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free Pasadena assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your Pasadena assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free Pasadena quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
My Pasadena epoxy softened after chemical spills. Can it be saved?
Usually not. Once a coating has softened or lost its bond it will not hold a new coat. We assess how far the damage goes, remove the failed film and recommend a system built for that exposure. Call (832) 253-3211.
What is left in a Pasadena shop after the epoxy is removed?
Clean, profiled concrete with repaired cracks and joints. If a spill has soaked into the slab, we tell you before a new system goes down. Call (832) 253-3211 to plan your Pasadena project.
Do you remove epoxy for Pasadena contractors and facility managers?
Yes. Contractors, owners and property managers across Pasadena use us to clear failed coatings ahead of new flooring, on schedule and documented. Larger floors are phased. Call (832) 253-3211.
How long does removal take for a Pasadena shop floor?
Most single garages are done in about a day. A shop or bay floor is scheduled in phases, and we confirm the timeline when we measure. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes. In Pasadena that keeps demo and install on one crew: the same team grinds off the failed epoxy and installs the new system, one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished Pasadena homes and businesses. Details on your free assessment, (832) 253-3211.
Do you also strip paint and sealers in Pasadena?
Yes. Floor paint, sealers, urethane and polyaspartic come off the same mechanical way. See our coating removal service or call (832) 253-3211 for a free Pasadena quote.
Will removal damage a Pasadena slab?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. Call (832) 253-3211.
My Pasadena floor coating failed. How do we get a longer-lasting one?
Match the system to the exposure, then prepare the slab properly. We moisture-test, install mitigation primer when needed and grind to a proper profile before anything goes down. Call (832) 253-3211.
Hablan Espanol en Pasadena?
Si. Cotizamos y trabajamos en ingles o espanol en Pasadena. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in Pasadena?
Yes. We come to your Pasadena home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in Pasadena
Every system we install and remove in Pasadena, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in Pasadena?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in Pasadena and we reply fast.
