#1 in Texason FloorRank ↗
Tomball, Texas · Epoxy Removal
Epoxy Removal in TomballFailed coating ground off. Clean concrete, or a brand-new floor, in.
Tomball has a lot of shops and equipment yards, and the epoxy in them has usually been through oil, hydraulic fluid and hard use. We grind it off to clean concrete and leave a slab you can build a proper floor on.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why Tomball epoxy floors fail
Tomball sits at the junction of State Highway 249 and FM 2920, with a mix of subdivisions like Amira and Willowcreek Ranch and a working side of fabrication shops, service bays and equipment lots. Epoxy in those buildings fails the way you would expect: oil and hydraulic fluid work under the edges, forklift and truck traffic lifts the film, and what is left is stained and hard to coat over. We grind it off, repair the slab and leave it profiled.
Epoxy demo in Tomball, done by the people who install epoxy
In Tomball we take epoxy removal for shop owners who need a floor back in service, for contractors on commercial buildings off SH 249, and for homeowners in Woodtrace or Inverness Estates dealing with a failed garage coating. Each wants the old epoxy gone, the concrete intact and the work finished without a long shutdown.
Remove and replace: old epoxy out, new floor in
After removal in Tomball the next floor depends on what happens on it: an industrial grade system for a shop or service bay, flake for a showroom or garage, polished concrete where a coating is just one more thing that can fail. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across Tomball
We handle epoxy removal in Tomball and the communities around it. These Tomball neighborhoods have their own pages:
After epoxy removal: every New Era system ready to go down in Tomball
With the Tomball slab ground clean, these are the floors the same crew can install on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why Tomball trusts the epoxy installers to remove epoxy
Oil in the slab changes the plan, and we would rather find it before we coat.
- Commercial grinders and diamond tooling sized for service bays and shop floors, not only residential garages.
- We check for oil and fluid contamination in the slab before a new system goes down, so it does not fail from below.
- We take off the coating, not the concrete: cracks, joints and spalls are repaired as part of the work.
- Honest assessment first. If your Tomball floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in Tomball FAQ
How much does epoxy removal cost in Tomball?
It depends on the square footage, how thick the coating is and how much fluid has soaked in. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free Tomball assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your Tomball assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free Tomball quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
Can a new coat go over oil-stained epoxy in my Tomball shop?
No. Oil and hydraulic fluid keep a new coating from bonding, and it lifts from the edges. The old film comes off and we look at what has soaked into the slab before anything new goes down. Call (832) 253-3211.
What shape is a Tomball shop slab in after removal?
Clean, profiled concrete with cracks, joints and spalls repaired. If fluid has gone deep, we tell you what it means for the next system. Call (832) 253-3211 to plan your Tomball project.
Can you work around a running Tomball shop or yard?
Yes. Larger floors are phased in sections so you can keep operating, with dust collection on the grinders and the work area contained. Call (832) 253-3211 to coordinate your Tomball job.
How long will a Tomball shop floor take?
Most single garages are done in about a day. A shop, bay or commercial floor is scheduled in phases, and we confirm the timeline when we measure it. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes. For a Tomball shop that usually means one project: the same crew grinds off the failed epoxy and installs the new system, one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished Tomball homes and businesses. Details on your free assessment, (832) 253-3211.
Do you remove other coatings from Tomball floors besides epoxy?
Yes. Floor paint, sealers, urethane and polyaspartic come off the same mechanical way. See our coating removal service or call (832) 253-3211 for a free Tomball quote.
Will removal damage the slab under my Tomball building?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. Call (832) 253-3211.
My Tomball floor coating failed. What do we do differently?
The prep and the product. We moisture-test, install mitigation primer when needed, grind to a proper profile, and size the system to the traffic. Then we walk the finished floor with you. Call (832) 253-3211.
Hablan Espanol en Tomball?
Si. Cotizamos y trabajamos en ingles o espanol en Tomball. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in Tomball?
Yes. We come to your Tomball home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in Tomball
Every system we install and remove in Tomball, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in Tomball?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in Tomball and we reply fast.
