#1 in Texason FloorRank ↗
Spring, Texas · Epoxy Removal
Epoxy Removal in SpringFailed coating ground off. Clean concrete, or a brand-new floor, in.
Spring is where New Era is based, and a lot of the epoxy we grind off up here was never a professional system to begin with. We take it down to clean concrete and rebuild the floor properly, or leave you a slab ready for the next step.
- Free on-site estimates
- Since 2015 Texas grown
- Installers who remove
- Espanol Hablamos
What epoxy removal is, and why Spring epoxy floors fail
Most of the failed epoxy we are called to in Spring is a thin kit coating that went down over a dusty, unground garage slab. It looks fine for a few months, then hot tires lift it, it peels at the door line, and it chips from the first dropped tool. Off Interstate 45 and out toward Gleannloch Farms and Augusta Pines, that is the usual story. We grind the film off, repair the cracks and joints underneath, and leave a profiled slab that a real system can bond to.
Epoxy demo in Spring, done by the people who install epoxy
Because New Era is based in Spring, a demo call here is close to home for the crew, not a trip across the metro. Homeowners in Old Town Spring and Klein, contractors working along the Grand Parkway and property managers in the commercial parks off the interstate all end up in the same place: a coating that has to come off cleanly before anything else happens.
Remove and replace: old epoxy out, new floor in
In Spring the replacement is usually a garage or workshop floor, so the choice comes down to flake for traffic and hot-tire resistance, metallic for a showpiece, or a solid color for a plain, tough shop floor. One crew, one schedule, one guaranteed price for the whole remove-and-replace, and the new floor goes over prep we did ourselves, so the warranty means something.
Epoxy Removal across Spring
We handle epoxy removal across Spring, from Old Town Spring to the neighborhoods along the Grand Parkway. These Spring areas have their own pages:
After epoxy removal: every New Era system ready to go down in Spring
With the Spring slab ground and repaired, these are the floors the same crew can install on it.
Metallic Epoxy
Liquid-metal floors with depth and movement no two slabs share. A true showpiece for garages, showrooms and retail.
Flake Systems
Full-flake and partial-flake epoxy that hides wear, resists hot tires and cleans with a mop. The garage favorite.
Polished Concrete
Mechanically polished from 800 to 3000 grit. A mirror finish that is the concrete itself, so nothing peels or chips.
Industrial Coatings
Heavy-duty systems for warehouses and plants that take forklifts, chemicals and round-the-clock traffic for a decade plus.
ESD Flooring
Static-dissipative floors that protect electronics, lab and manufacturing environments from electrostatic discharge.
Stained Concrete
Rich, permanent color worked into the slab for a custom look indoors or out, sealed to last.
Why Spring trusts the epoxy installers to remove epoxy
A store-bought kit and a ground slab are two different starting points.
- New Era is based in Spring, so a Spring job is close to home for us, not a long haul.
- We know what a thin kit coating looks like when it lets go, and how to take it off without gouging the slab beneath.
- Cracks, joints and spalls get repaired during prep, so the slab is sound before anything new goes down.
- Honest assessment first. If your Spring floor is sound enough to recoat, we tell you and save you the removal.
- Remove and replace in one project with one guaranteed price, and the new floor is backed by our written workmanship warranty.
- Established 2015, English and Spanish service end to end.
We take coating removal seriously enough to teach it: surface prep and removal are part of the training at New Era Epoxy Academy's removal training.
Epoxy Removal in Spring FAQ
How much does epoxy removal cost in Spring?
It depends on the square footage, how thick the coating is and how well it is still bonded. Most Spring garages are quick to scope. Instead of guessing, we come out, measure and give you guaranteed pricing at no cost, including a remove-and-replace price if you want the new floor quoted too. Call (832) 253-3211 for your free Spring assessment.
How do you remove an epoxy floor?
Mechanically. We diamond-grind the coating off down to sound, clean concrete, then repair cracks, joints and spalls so the slab is profiled and ready for what comes next. We never rely on chemical strippers as the main method. Book your Spring assessment at (832) 253-3211.
Can I remove epoxy flooring myself?
Small areas, sometimes, but rented grinders and chemical strippers are slow, messy and hard on the slab, and a gouged slab costs more to fix than professional removal. We give honest advice either way on a free Spring quote, call (832) 253-3211. We even teach proper removal and surface prep at New Era Epoxy Academy.
My garage kit epoxy in Spring is peeling. Can I just recoat it?
Not if it is peeling. A new coat over a loose one fails along the same lines, and most store-bought kits were never ground into the slab to begin with. We check how much is still bonded and tell you straight whether it has to come off. Call (832) 253-3211.
What does a Spring garage slab look like after removal?
Clean, lightly profiled concrete with the old coating gone, the cracks filled and the door-line edge repaired. It is bare gray and ready for a new system, or broom-clean if you want to leave it. Call (832) 253-3211 to plan your Spring project.
Do you handle removal for builders and remodelers around Spring?
Yes. Builders, remodelers and property managers working in Spring and along the Grand Parkway use us to clear failed coatings before new flooring, on schedule and documented. Call (832) 253-3211 to coordinate your job.
How long does a Spring garage take?
Most single garages are done in about a day. A larger workshop or commercial floor gets phased so you can keep working, and we confirm the schedule when we measure. Call (832) 253-3211.
Can you remove and replace the floor in one project?
Yes, and plenty of Spring homeowners ask for exactly that. The crew that grinds off the old epoxy installs the new system, which keeps it to one schedule and one guaranteed price. Ask for the remove-and-replace quote at (832) 253-3211.
Is epoxy removal dusty?
We grind with dust collection running on the machines and contain the work area, so removal stays controlled even inside finished Spring homes and businesses. Details on your free assessment, (832) 253-3211.
Can you remove paint or sealer from a Spring garage floor too?
Yes. Garage paint, sealers, urethane and polyaspartic all come off the same professional way. See our coating removal service or call (832) 253-3211 for a free Spring quote.
Will grinding hurt my Spring slab?
No. We take off the coating, not the concrete, and any cracks or spalls we uncover get repaired as part of prep. The slab comes out sounder than we found it. Call (832) 253-3211.
My Spring garage floor failed once. How do we avoid a repeat?
Prep is where most failures start. We moisture-test, install mitigation primer when needed, and grind to a proper profile before anything goes down, then walk the finished floor with you. Call (832) 253-3211.
Hablan Espanol en Spring?
Si. Cotizamos y trabajamos en ingles o espanol en Spring. Llame al (832) 592-3808, o al (832) 253-3211 para una cotizacion gratis.
Do you offer free epoxy removal estimates in Spring?
Yes. We come to your Spring home or business, assess the coating, measure and give guaranteed pricing at no cost, removal only or remove-and-replace. Call (832) 253-3211 and we typically respond within 24 hours.
More New Era services in Spring
Every system we install and remove in Spring, Texas:
Epoxy Removal in other Texas cities
Ready for a new floor in Spring?
Free on-site estimate, guaranteed pricing, and a floor built to last. Tell us about your space in Spring and we reply fast.
